Liquid Rubber Articles

How To Make and Waterproof an Aquarium using Liquid Rubber Waterproof Sealant

There's a lot of questions about How To Make and Waterproof an Aquarium using Liquid Rubber Waterproof Sealant.

 

For example:

Can I use Liquid Rubber Waterproof Sealant to waterproof my wood aquarium?

How do I waterproof my aquarium?

Is Liquid Rubber safe for fish?

Can I seal glass to Liquid Rubber?

Will silicone stick to Liquid Rubber?

What coverage do I need for my aquarium?

How long does Liquid Rubber Waterproof Sealant take to cure?

 

The ability to create your aquarium out of wood has been revolutionized by Liquid Rubber. Previously you would not have been able to create intricate designs or even use wood. With the flexibility and ease of use provided by Liquid Rubber, you're only limited by your imagination.  Here's a couple examples of some pretty neat designs.  How to create Ponds and Pond Repair with Liquid Rubber

 

First off, Liquid Rubber Waterproof Sealant is an excellent choice on how to waterproof an aquarium.  It has 100% waterproofing ability and excellent adhesion to give a completely seamless membrane.  It can be rolled on, brushed on and even sprayed on with a high quality piston pump (used in large jobs).

 

Initially you'll want to bridge all seams, glass, cracks and gaps with Liquid Rubber Seam Tape.  What this does is ensure a bulletproof system.  If your aquarium is going to leak, it most likely will be at one of these areas.

 

Once the Liquid Rubber Seam Tape has been applied, you can start applying the Liquid Rubber Waterproof Sealant.  The best way to build your membrane is in multiple coats.  The thicker you put it on, the longer it takes to cure.  Curing ranges 6-8 hours per coat depending on temperature and humidity.  The best way to determine is by touch.  Once the final membrane is applied, it's best to leave curing 4-7 days before use.

Coverage will range from 12 sq ft - 15 sq ft per gallon.  Usually where the most pressure will be is where you'll want the thicker membrane.  2 - 3mm (80 - 120 ml) dry film thickness (DFT).

 

Silicone is not compatible with Liquid Rubber.  If you need to use a type of caulking, a butyl rubber is recommended.

 

Liquid Rubber products are water based making them safe for fish, they contain no solvents or VOC's.  You can find more information on our website for products and where to buy Liquid Rubber.

 

There are many possibilities in creating your next aquarium, have fun and we'd love to see how your project turns out.

← Next Post