Flexible Corrosion Coating

• Ultrahigh corrosion protection
• Can be applied directly over lightly rusted surfaces
• Creates a long lasting waterproof membrane
• Excellent adhesion, chemical and UV resistance
• Resists cracking, chipping, impact and abrasion
• Resistant to freeze/thaw cycles
• Withstands extreme hot and cold environments
• Easy to apply roller, brush & spray equipment
• Available in BLACK ONLY

For Flat and Ponding Surfaces:

• Apply a minimum final thickness of 1 gallon per 15 sq ft (1.4 sq/m). It should require around 4-5 heavy coats to achieve a 60-80 mil. (1.5-2.0mm) (DFT) membrane.

For Vertical Surfaces:

• Apply a minimum final thickness of 1 gallon per 30 sq ft (2.8 sq/m). Apply 2-3 heavy coats to achieve a 30 mil. (0.76mm) (DFT) membrane.
   

• Avoid hot, direct, intense sun when applying.  Mornings and Evenings are best if it's blistering hot
• Product stays soft, flexible and may have some tackiness, not meant as a constant walking surface
• Apply next heavy coat when it's dry to touch (typically 12-24 hours), make sure there is no uncured material underneath.  Tacky is ok
• Generally you can apply 1-2 heavy coats per day
• Apply all material until you use up the required amount
• Do not combine Black products with Coloured products, use one or the other
• For larger areas, pour out and spread around with a broom, roller or squeegee
• Apply above 5C/40F
• Curing time depends on temperature, humidity and airflow
• Apply next coat(s) as soon as possible not allowing extended time between if possible
• For areas without corrosion, use Waterproof Sealant, or Liquid Rubber Coloured Waterproof Sealant.
• Do not apply later in the day if Dew is forecast or if rain is expected within 24 hours

• Liquid Rubber MetalSafe Sealant Data Sheet
• Liquid Rubber MetalSafe Sealant Safety Data Sheet