Your Cart is Empty
Basement - Interior Walls Waterproofing - Liquid Rubber Coating
Liquid Rubber Foundation Sealant is a liquid applied coating that cures into a seamless waterproof membrane. This product is water-based and contains no solvents, is VOC-free and is non-toxic. Color options are available.
Steps
- Ensure a clean, dry surface
- If you have deep cracks, fill with a Crack Injection Kit
- Bridge joints, cracks, seams etc., with Liquid Rubber Seam Tape or Liquid Rubber Geo-Textile
- Build up heavy coats to achieve required thickness. 20-30 mil (0.5-0.75 mm) Dry Film Thickness. Minimum 2-3 coats
- Can use Liquid Rubber Foundation Sealant or Liquid Rubber Colour Waterproof Sealant.
- COVERAGE - Coverage rates vary by product. See product page for coverage rates.
- See below for Products used
Tips
- Ensure rain gutters have extensions taking water away from your home
- Build grade/earth/dirt/drainage sloping away from your home
- Weeping Tile can be installed to direct water away
- Dust or dirt can cause loss of adhesion
- Product stays soft, flexible and may have some tackiness
- Cracks can be injected with an Epoxy Injection Kit
- Apply the next heavy coat when the product is dry to the touch and nothing is wet underneath. Tacky is ok
- Apply material until you use up the required amount
- Use a roller or brush and apply above 10C (50F)
- Curing time depends on temperature, humidity and airflow
- Can be painted over with standard wall paint
- Always best to waterproof from the outside (positive) side
Colors
-
Original Black
-
Brilliant White
-
Light Grey
-
Med Grey
-
Dark Grey
-
Tan
-
Brown
-
Hunter Green
-
Tintable- Med Base
Due to Computer Monitors, Colours may not be exactly as shown
