Foundations - Exterior - Liquid Rubber Coating
Liquid Rubber Foundation Sealant is a liquid applied coating that cures into a seamless waterproof membrane. Applications include - Concrete, Wood, Cinder Block & Insulated Concrete Forms (ICF's). Flexible down to -20C/-4F for exterior, below grade, cold climate applications. Water-based - No Solvents, VOC-free and Non-Toxic
Steps
- Ensure a clean, dry surface
- Bridge joints, cracks, seams... with Liquid Rubber Seam Tape or Liquid Rubber Geo-Textile
- Build up heavy coats to achieve required thickness. 60 mil (1.5 mm) Dry Film Thickness
- See below for Products used and Coverage
Tips
- Dust or dirt can cause loss of adhesion
- Product stays soft, flexible and may have some tackiness
- Apply the next coat when the product is dry to the touch
- Apply material until you use up the required amount
- Use a roller or brush to apply
- Apply above 5C (40F)
- Curing time depends on temperature, humidity and airflow
- Protect from backfill with Rigid Insulation or Dimple Board
Videos
Purchase Products
Foundation Sealant
Geo-Textile
