RV Roofs New

Free Shipping on orders $74.95+

Login 0

Your Cart is Empty

Don't Replace Your RV Roof, Restore IT! 10X Less Cost

How much should you pay for a RV Roof Restoration? $399 or $4000?

find out why liquid rubber rv roof coating is the top rated rv roof restoration product on amazon.

Below you'll find out the simple secret of restoring your RV Roof like a Pro, saving thousands of dollars and protecting your investment.

Protect Your Everlasting Family Memories

Any recreational vehicle gives you the chance to create memories that will last a lifetime. From traveling across the country to going camping for the weekend, your RV is the sanctuary that allows you to have a home away from home.

Yet RVs are notorious for leaks, and those leaks can quickly ruin a family vacation...and the lifelong mental souvenirs that were supposed to come with it. Liquid Rubber’s RV Roof Coating never lets another leak steal away those precious memories.

Keeping Your Family Safe, Cool, and Happy

The RV’s biggest strength is the potential for it to deliver you and your family on unforgettable journeys. Unfortunately, the RV also has a weakness. Vents, skylights, tears, and more leave the RV vulnerable to leaks and overheating that can turn your dream vacation into a nightmare.

With Liquid Rubber RV Roof Coating, those vulnerabilities disappear. It cures into a waterproof membrane, giving your vehicle the armor it needs to deliver you and your family safely to and from your destination.

And this solar reflective and UV resistant coating keeps your RV cool, meaning you’ll be comfortable throughout your entire journey.

Eliminates the Costly Repair Services Keeping You From Your Next Vacation

Delivering the highest quality possible is what drives Liquid Rubber because it serves as the gateway to our customers’ happiness.

When it comes to our RV Roof Coating, some of that happiness comes from helping you avoid those costly repairs that normally accompany any recreational vehicle.

This environmentally friendly coating keeps your RV from falling victim to the perils of leaks, and DIY application means virtually

Ensure a clean, dry surface - use Liquid Rubber RV Roof Cleaner
Wipe roof with acetone as a final surface clean on EPDM Roofs
Use EPDM Primer on EPDM Roofs and Multi-Purpose Primer on fiberglass, aluminum
EPDM is a rubber sheet membrane, TPO is a plastic sheet membrane
Bridge joints, seams, vents, skylights etc., with Liquid Rubber SeamTape
Apply Liquid Rubber RV Roof Coating
Read full Application Guideline in Documents below
See Products Used below

Apply using a 3/8 (10mm) roller, brush or paint sprayer.
Apply to a clean, dry surface that is free of dirt, silicone, loose paint, rust, oil, grease, coal tar, or other contaminants.
Apply when temperature is above 10C/50F and rising.
Use Liquid Rubber RV Smart Cleaner to clean the surface.
Use Liquid Rubber EPDM Primer for EPDM roofs and Liquid Rubber Multi-Purpose for most others. (We do not have a primer for TPO roofs at this time.)
Apply each new coat in an alternate direction to the previous coat to ensure even thickness.
Apply next coat when dry to the touch (typically 6-8 hours, tacky is OK).
Typically cures in 48 hours.
Avoid hot, direct, intense sun when applying.
Avoid contact with solvents and solvent based cleaners, adhesives and paints.
Do not allow to freeze.
Do not combine black products with the colored products.
Do not apply in wet conditions (including fog and dew) or if rain is forecasted within 24 hours.
EPDM is a rubber sheet coating.
TPO and PVC are a plastic type sheet membrane. (we do not currently carry a primer for TPO)
Generally you can apply 1-2 coats per day
Apply material until you use up the required amount
Curing time depends on temperature, humidity and airflow
Remove painters tape as soon as possible (while coating is still wet).
If corrosion is present use a water-based rust primer.
Method: Work in manageable sections. Apply the Liquid Rubber EPDM Primer to one side of the RV (leaving the other side uncoated so that you can walk and work on it. ) Allow the Liquid Rubber EPDM Primer to dry for 1-2 hours. Apply the Liquid Rubber RV Roof Coating over the Liquid Rubber EPDM Primer, leaving 4-6 inches of the primer exposed so that you will be able to overlap it when you begin the second side. Allow the Liquid Rubber RV Roof Coating to dry enough to walk on, and repeat the process for the second side.
Make sure what you’re coating is at least 5 degrees above the dew point of the environment you are coating in. (See technical specs for more details)
For best results remove existing paints/coatings and apply directly to the substrate. (Some paints and coatings will not be compatible. Loose/flaky paint may be an indication that the existing paint/coating is not well bonded and therefore your Liquid Rubber solution may fail if applied over it instead of directly to the substrate. Oil based paints, enamels, epoxies, powder coats can be difficult to bond to. Contact your Liquid Rubber technical representative for further direction.)
If your RV is still under warranty be sure to contact the manufacturer to ensure you do not void the warranty.
It is always a good idea to apply a small test patch in an inconspicuous area to ensure adequate adhesion prior to full application.

Apply a minimum final thickness of 1 gallon per 50 sq ft (4.65 sq/m). It should require around 2-3 heavy coats.
1 x 5 gallon pail of RV Roof Coating will coat RV's up to 30 feet. Be sure to use up all material.

RV Roof Restoration using Liquid Rubber RV Roof Coating
Watch the video
Trailer Roof Restoration - Liquid Rubber RV Roof Coating
Watch the video
Applying Seam Tape - Liquid Rubber Seam Tape
Watch the video

Liquid Rubber RV Roof Coating Application Guideline

PRODUCTS USED FOR RV ROOFS

Rv roof smart cleaner

Good product. Cleaned up dirt and sap on roof as stated. Used their EPDM tape to repair small tear in roof. Will use Liquid Products again.

Pour une roulotte

produit facile d'utilisation et performant

RV Roof smart Cleaner

Works good ,do small area at a time.

To be fair

I only gave this product 4 stars simply because I just applied it and am waiting to see how it stands up to the weather. If I could break down the stars into steps , for application I would give it 6 stars (better than 5). It goes on so well, is easy to apply and cleans up quickly with a little soap and hot water. It is actually leading me to think of using some of your other products especially the Polyurethane Deck Coating. Thanks for creating and selling such a great product.
Laurie McGuire BC

RV Roof Cleaner

Fast acting cleaner that restores and revitalizes your RV Roof
Eliminates stains and contamination using Oxygen Action
Use of tough cleaning tasks like algae, mold, mildew, grease and dirt
Non-Toxic, Biodegradable, no VOC's, Acid, Chlorine or Bleach
Use on EPDM Rubber Roofs, Fiberglass, Metal, Wood, Concrete
Let RV Smart Cleaner do the hard work so you don't have to

Steps

Read Application Information before starting
Ready to use. Do not dilute. Wet surface lightly with garden hose.
Apply product generously using brush, roller or larger vented garden sprayer. Allow solution to stand 5-10 minutes without drying.
Work into the surface using a stiff bristle brush. Scrub a small section first to determine if area is cleaned.
For best results, rinse thoroughly using a pressure washer.
For stubborn stains, repeat application.

Approximately 200 sq.ft. (18 sq.m.) - 400 sq.ft. (37 sq.m.)per 1G (3.78L).

Liquid Rubber RV Smart cleaner SDS

Liquid Rubber RV Roof Smart Cleaner

$34.95

Rv roof smart cleaner

Good product. Cleaned up dirt and sap on roof as stated. Used their EPDM tape to repair small tear in roof. Will use Liquid Products again.

Pour une roulotte

produit facile d'utilisation et performant

RV Roof smart Cleaner

Works good ,do small area at a time.

To be fair

I only gave this product 4 stars simply because I just applied it and am waiting to see how it stands up to the weather. If I could break down the stars into steps , for application I would give it 6 stars (better than 5). It goes on so well, is easy to apply and cleans up quickly with a little soap and hot water. It is actually leading me to think of using some of your other products especially the Polyurethane Deck Coating. Thanks for creating and selling such a great product.
Laurie McGuire BC

RV Roof Cleaner

Fast acting cleaner that restores and revitalizes your RV Roof
Eliminates stains and contamination using Oxygen Action
Use of tough cleaning tasks like algae, mold, mildew, grease and dirt
Non-Toxic, Biodegradable, no VOC's, Acid, Chlorine or Bleach
Use on EPDM Rubber Roofs, Fiberglass, Metal, Wood, Concrete
Let RV Smart Cleaner do the hard work so you don't have to

Steps

Read Application Information before starting
Ready to use. Do not dilute. Wet surface lightly with garden hose.
Apply product generously using brush, roller or larger vented garden sprayer. Allow solution to stand 5-10 minutes without drying.
Work into the surface using a stiff bristle brush. Scrub a small section first to determine if area is cleaned.
For best results, rinse thoroughly using a pressure washer.
For stubborn stains, repeat application.

Approximately 200 sq.ft. (18 sq.m.) - 400 sq.ft. (37 sq.m.)per 1G (3.78L).

Liquid Rubber RV Smart cleaner SDS

We believe everyone should have a choice to buy high quality, environmentally friendly products. We believe you should have a choice to do your own projects (most of the time you can do it better yourself than hiring someone) and save money. We believe in Free Shipping (over $75) and Free Returns. We believe in making your experience the best it can possibly be. Please, please reach out to us with any questions. We want to make your project a success.

Materials are user friendly and effective

Seam tape

I used it to cover existing vent seals and end seal of roof. Between aluminum and rubber roof.
One roll did my 27 ft trailer

Repeat tape purchase

It survived last winter. Purchased another to fix a tear and cover some more RV roof seems. The paint survived too. Great stuff so far. 3 thumbs up. Will purchase again when needed. Especially the paint.

Bon tape de toit

L'adhésif colle super bien. La bande de tissu empêche le produit d'être trop rigide et permet une pose plus aisée. Le seul hic, c'est qu'on doit le recouvrir d'enduit. On ne peut pas l'utiliser seul. Sinon c'est un excellent produit. Et combiné à l'enduit, c'est assurément la barrière la plus performante.

Was tough to prepare surface but we'll see next year

Hi,
I had 5 leaking corners grouped all together in a total segment of about 20 feet. Old thick grainy caulking was very tough to remove. Very hard and sticky. Best strategy to remove it was using a multi-tool (vibrating) with a small cutting blade. This was working greath but left a layer of residue. I used a glue remover called "The glue buster". It worked great and quickly. Then I used a wireless drill with a metal wire brush and wd-40 to disolve the leftover adhésive and reach bare métal (alluminum). I then applied a rich soapy solution and did the brush thing with drill using a new brush. I rinced everything to neutralize the glue cleener and the soapy residual. Then I applided an industrial grade cleaner to clean the whole gutter. A few days later, when weather forcast was good, I applied the seam tape. I used Windex on a towel to get rid of any greasy material on the locations to repair. Then, I used the seam tape. It was easier to apply than expected. I did not take any chance and I probably put more than required. With my pack of 2 x 15 feet = 30 feet, I only managed to do 3 corners instead of 5. I will have to order an extra pack. I put a single layer of the liquide rubber right now on 3 corners. I guess that quart that I am using Will be enough to complete the 5 corners with 2, maybe 3 layers. Put plastic gloves to apply then liquid rubber since it is not easy to remove it from fingers.
Repairing à corner is tricky and required more work than a straight section. Honestly, for all the work I had to do to prepare the 5 sections, maybe I should have paid someone to replace the problematic section but that would have cost a lot more and my time is free. I wish I would have find the multitool and glue buster and the drill wire brush before. The end result has a professional look and feel. Time will tell if it is a durable fix but I did everything by the book to get the best results. I will keep you poster.

1 2 3

Peel and Stick

This product is used to seal roof joints (seams) and tears, copings; flashings, skylights; gutters, etc. Perfect for repairing and restoring roofs of residential and commercial buildings, mobile homes & RVs.

Bonds to a wide range of surfaces including difficult roof materials such as: EPDM, TPO, most PVC, SBS, APP, BURs, metal roofs, tiles, shingle, aluminum, galvanized steel, wood, propylene, polystyrene, fiberglass, brick, concrete, masonry, OSB, etc.

Paintable Seam Tape is used as part of the waterproof system with Liquid Rubber Coatings.

Liquid Rubber Seam Tape

$44.95

We believe everyone should have a choice to buy high quality, environmentally friendly products. We believe you should have a choice to do your own projects (most of the time you can do it better yourself than hiring someone) and save money. We believe in Free Shipping (over $75) and Free Returns. We believe in making your experience the best it can possibly be. Please, please reach out to us with any questions. We want to make your project a success.

Materials are user friendly and effective

Seam tape

I used it to cover existing vent seals and end seal of roof. Between aluminum and rubber roof.
One roll did my 27 ft trailer

Repeat tape purchase

It survived last winter. Purchased another to fix a tear and cover some more RV roof seems. The paint survived too. Great stuff so far. 3 thumbs up. Will purchase again when needed. Especially the paint.

Bon tape de toit

L'adhésif colle super bien. La bande de tissu empêche le produit d'être trop rigide et permet une pose plus aisée. Le seul hic, c'est qu'on doit le recouvrir d'enduit. On ne peut pas l'utiliser seul. Sinon c'est un excellent produit. Et combiné à l'enduit, c'est assurément la barrière la plus performante.

Was tough to prepare surface but we'll see next year

Hi,
I had 5 leaking corners grouped all together in a total segment of about 20 feet. Old thick grainy caulking was very tough to remove. Very hard and sticky. Best strategy to remove it was using a multi-tool (vibrating) with a small cutting blade. This was working greath but left a layer of residue. I used a glue remover called "The glue buster". It worked great and quickly. Then I used a wireless drill with a metal wire brush and wd-40 to disolve the leftover adhésive and reach bare métal (alluminum). I then applied a rich soapy solution and did the brush thing with drill using a new brush. I rinced everything to neutralize the glue cleener and the soapy residual. Then I applided an industrial grade cleaner to clean the whole gutter. A few days later, when weather forcast was good, I applied the seam tape. I used Windex on a towel to get rid of any greasy material on the locations to repair. Then, I used the seam tape. It was easier to apply than expected. I did not take any chance and I probably put more than required. With my pack of 2 x 15 feet = 30 feet, I only managed to do 3 corners instead of 5. I will have to order an extra pack. I put a single layer of the liquide rubber right now on 3 corners. I guess that quart that I am using Will be enough to complete the 5 corners with 2, maybe 3 layers. Put plastic gloves to apply then liquid rubber since it is not easy to remove it from fingers.
Repairing à corner is tricky and required more work than a straight section. Honestly, for all the work I had to do to prepare the 5 sections, maybe I should have paid someone to replace the problematic section but that would have cost a lot more and my time is free. I wish I would have find the multitool and glue buster and the drill wire brush before. The end result has a professional look and feel. Time will tell if it is a durable fix but I did everything by the book to get the best results. I will keep you poster.

1 2 3

Peel and Stick

This product is used to seal roof joints (seams) and tears, copings; flashings, skylights; gutters, etc. Perfect for repairing and restoring roofs of residential and commercial buildings, mobile homes & RVs.

Bonds to a wide range of surfaces including difficult roof materials such as: EPDM, TPO, most PVC, SBS, APP, BURs, metal roofs, tiles, shingle, aluminum, galvanized steel, wood, propylene, polystyrene, fiberglass, brick, concrete, masonry, OSB, etc.

Paintable Seam Tape is used as part of the waterproof system with Liquid Rubber Coatings.

We believe everyone should have a choice to buy high quality, environmentally friendly products. We believe you should have a choice to do your own projects (most of the time you can do it better yourself than hiring someone) and save money. We believe in Free Shipping (over $75) and Free Returns. We believe in making your experience the best it can possibly be. Please, please reach out to us with any questions. We want to make your project a success.

Great product

The product works really well. I have redone two campers with roof leaks and enjoy working with this product.
Even thou my last order was not correct sales support was amazing and overnighted me the correct stuff.
Couldn’t have ask for better service.

Our RV roof has a new lease on life, thank you liquid rubber!

From the expert advise to fast shipping we are so impressed with the liquid rubber EDPM primer and liquid rubber RV roof products. We have full confidence that we are covered against leaks!

Liquid rubber is genius!!!!

Just about completed my new pond which is 8x7 feet by 5feet deep. This is an absolute genius product for such a huge project! Works beautifully! THANK YOU LIQUID RUBBER!

Appears to have worked!

I applied this to my RV that I am restoring. The roof (40yrs old) was in it rough shape and I thought I would try this and it looks great. It has not rained yet but with a hose it appears to have worked fixing all of the micro fibre cracks and it looks brand new. We will see when it rains heavy how it holds up. I also bought to much so I will be sending one container back.

????

Remains tacky after 3 weeks. Something to do?

1 2 3

EPDM Primer is a rubber polymer water based roofing primer, and like its name; its been specifically designed for EPDM surfaces. EPDM Rubber is extremely hard to stick to without a quality Primer. This Primer does not react with atmospheric moisture allowing it to be opened and resealed for use at a later date.

Basic Use

Primer is used to prime EPDM roofing membranes to provide improved adhesion for the Liquid Rubber RV Roof Coating and other Liquid Rubber Coatings.

Surface Preparation

All work surfaces should be clean, dry; free of dirt, dust; debris, oils; un-adhered coatings, deteriorated membranes and other contaminants that may result in a surface that is uneven or not sound. Clean the surface with Liquid RV Smart Cleaner and wipe down with acetone prior to the application of the Primer. Primer is extremely sticky, it is best to apply on half the surface leaving a work area to stand on. Apply Primer then top coating (ie. RV Roof coating) and then repeat on the other half where you can stand on the completed side.

Limitations

Do not use as a membrane cleaner.
Talc, dust; oil, ice; snow or wet conditions inhibit good adhesion. Clean and dry surfaces are a necessity.
Not to be used on TPO and PVC roof membranes.
Install above 10C (50F) and rising
Do not apply later in the day if Rain or Dew is forecast

Equipment Clean Up

Use Soap and Water

Storage & Shelf Life

Store material in original unopened containers at temperatures between 40°F - 90°F (4°C - 32°C). Shelf life is 12 months when stored in unopened container.

Apply a minimum final thickness of 1 gallon per 250 sq ft (23.23 sq/m).

Restore RV Roof

Restore Trailer Roof

Apply Seam Tape to Skylight

Liquid Rubber RV Roof and EPDM Rubber Primer

$84.95

We believe everyone should have a choice to buy high quality, environmentally friendly products. We believe you should have a choice to do your own projects (most of the time you can do it better yourself than hiring someone) and save money. We believe in Free Shipping (over $75) and Free Returns. We believe in making your experience the best it can possibly be. Please, please reach out to us with any questions. We want to make your project a success.

Great product

The product works really well. I have redone two campers with roof leaks and enjoy working with this product.
Even thou my last order was not correct sales support was amazing and overnighted me the correct stuff.
Couldn’t have ask for better service.

Our RV roof has a new lease on life, thank you liquid rubber!

From the expert advise to fast shipping we are so impressed with the liquid rubber EDPM primer and liquid rubber RV roof products. We have full confidence that we are covered against leaks!

Liquid rubber is genius!!!!

Just about completed my new pond which is 8x7 feet by 5feet deep. This is an absolute genius product for such a huge project! Works beautifully! THANK YOU LIQUID RUBBER!

Appears to have worked!

I applied this to my RV that I am restoring. The roof (40yrs old) was in it rough shape and I thought I would try this and it looks great. It has not rained yet but with a hose it appears to have worked fixing all of the micro fibre cracks and it looks brand new. We will see when it rains heavy how it holds up. I also bought to much so I will be sending one container back.

????

Remains tacky after 3 weeks. Something to do?

1 2 3

EPDM Primer is a rubber polymer water based roofing primer, and like its name; its been specifically designed for EPDM surfaces. EPDM Rubber is extremely hard to stick to without a quality Primer. This Primer does not react with atmospheric moisture allowing it to be opened and resealed for use at a later date.

Basic Use

Primer is used to prime EPDM roofing membranes to provide improved adhesion for the Liquid Rubber RV Roof Coating and other Liquid Rubber Coatings.

Surface Preparation

All work surfaces should be clean, dry; free of dirt, dust; debris, oils; un-adhered coatings, deteriorated membranes and other contaminants that may result in a surface that is uneven or not sound. Clean the surface with Liquid RV Smart Cleaner and wipe down with acetone prior to the application of the Primer. Primer is extremely sticky, it is best to apply on half the surface leaving a work area to stand on. Apply Primer then top coating (ie. RV Roof coating) and then repeat on the other half where you can stand on the completed side.

Limitations

Do not use as a membrane cleaner.
Talc, dust; oil, ice; snow or wet conditions inhibit good adhesion. Clean and dry surfaces are a necessity.
Not to be used on TPO and PVC roof membranes.
Install above 10C (50F) and rising
Do not apply later in the day if Rain or Dew is forecast

Equipment Clean Up

Use Soap and Water

Storage & Shelf Life

Store material in original unopened containers at temperatures between 40°F - 90°F (4°C - 32°C). Shelf life is 12 months when stored in unopened container.

Apply a minimum final thickness of 1 gallon per 250 sq ft (23.23 sq/m).

Restore RV Roof

Restore Trailer Roof

Apply Seam Tape to Skylight

We believe everyone should have a choice to buy high quality, environmentally friendly products. We believe you should have a choice to do your own projects (most of the time you can do it better yourself than hiring someone) and save money. We believe in Free Shipping (over $75) and Free Returns. We believe in making your experience the best it can possibly be. Please, please reach out to us with any questions. We want to make your project a success.

Fantastic product.

Does a super job as advertised, maybe better, I will be ordering more.

RV roof. 13 yrs old

I have a 27 foot toy hauler, the roof was 13 yrs old, And covered in black spots and had a small leak in the bathroom. It was time to due some maintenance. I purchased, cleaner, primer, sealer tape and 5 gallons of liquid rubber. The roof was cleaned and primed. All roof fixtures taped along with the front and back edges.
The first coat was difficult due to the tackiness of the primer, ended in bare feet, but had 4 clear days and applied 4 coats. 👍🤞🏻Now happy and hoping for another ten years.

Works perfectly

Fixed my leaking roof on my RV after the first coat! I recommend this to anyone who needs to stop a leak or help prevent one.

Primer issue

Primer was very sticky - had difficulty keeping debris off roof

Restaurer le toit de ma tente-roulotte

J’ai utilisé le primer tout usage et le Roof coating pour restaurer le toit d’une tente roulotte en fibre de verre aluminium qui avait 10 ans. Le primer semble avoir aidé à préparer la surface. Il faut aussi bien laver le toit. J’ai légèrement sablé la surface et j’avais fait les réparation avec le Seam tape.

J’ai eu beaucoup trop de produit avec le 5 gallons. J’ai mis 5-6 couches épaisses et il m’est resté plus de la moitié du 5 gallons. Prévoir un rouleau non pelucheux. Par contre il y avait de petits grumeaux dans le produit qui rendait l’application moins uniforme. Je devais les enlever au fur et à mesure que je roulais le produit, car c’est trop épais à filtrer. Sinon c’est un excellent produit que je recommande.

1 2 3

Protect Your Everlasting Family Memories

Any recreational vehicle gives you the chance to create memories that will last a lifetime. From traveling across the country to going camping for the weekend, your RV is the sanctuary that allows you to have a home away from home.

Yet RVs are notorious for leaks, and those leaks can quickly ruin a family vacation...and the lifelong mental souvenirs that were supposed to come with it. Liquid Rubber’s RV Roof Coating never lets another leak steal away those precious memories.

Keeping Your Family Safe, Cool, and Happy

The RV’s biggest strength is the potential for it to deliver you and your family on unforgettable journeys. Unfortunately, the RV also has a weakness. Vents, skylights, tears, and more leave the RV vulnerable to leaks and overheating that can turn your dream vacation into a nightmare.

With Liquid Rubber RV Roof Coating, those vulnerabilities disappear. It cures into a waterproof membrane, giving your vehicle the armor it needs to deliver you and your family safely to and from your destination.

And this solar reflective and UV resistant coating keeps your RV cool, meaning you’ll be comfortable throughout your entire journey.

Eliminates the Costly Repair Services Keeping You From Your Next Vacation

Delivering the highest quality possible is what drives Liquid Rubber because it serves as the gateway to our customers’ happiness.

When it comes to our RV Roof Coating, some of that happiness comes from helping you avoid those costly repairs that normally accompany any recreational vehicle.

This environmentally friendly coating keeps your RV from falling victim to the perils of leaks, and DIY application means virtually

Apply a minimum final thickness of 1 gallon per 50 sq ft (4.65 sq/m). It should require around 2-3 heavy coats to achieve your final membrane.
1 x 5 gallon pail of RV Roof Coating will coat RV's up to 30 feet. Be sure to use up all material.

Tips

Apply using a 3/8 (10mm) roller, brush or paint sprayer.
Apply to a clean, dry surface that is free of dirt, silicone, loose paint, rust, oil, grease, coal tar, or other contaminants.
Apply when temperature is above 10C/50F and rising.
Use Liquid Rubber RV Smart Cleaner to clean the surface.
Use Liquid Rubber EPDM Primer for EPDM roofs and Liquid Rubber Multi-Purpose for most others. (We do not have a primer for TPO roofs at this time.)
Apply each new coat in an alternate direction to the previous coat to ensure even thickness.
Apply next coat when dry to the touch (typically 6-8 hours, tacky is OK).
Typically cures in 48 hours.
Avoid hot, direct, intense sun when applying.
Avoid contact with solvents and solvent based cleaners, adhesives and paints.
Do not allow to freeze.
Do not combine black products with the colored products.
Do not apply in wet conditions (including fog and dew) or if rain is forecasted within 24 hours.
EPDM is a rubber sheet coating.
TPO and PVC are a plastic type sheet membrane. (we do not currently carry a primer for TPO)
Generally you can apply 1-2 coats per day
Apply material until you use up the required amount
Curing time depends on temperature, humidity and airflow
Remove painters tape as soon as possible (while coating is still wet).
If corrosion is present use a water-based rust primer.
Method: Work in manageable sections. Apply the Liquid
Rubber EPDM Primer to one side of the RV (leaving the other
side uncoated so that you can walk and work on it. ) Allow
the Liquid Rubber EPDM Primer to dry for 1-2 hours. Apply
the Liquid Rubber RV Roof Coating over the Liquid Rubber
EPDM Primer, leaving 4-6 inches of the primer exposed so that
you will be able to overlap it when you begin the second side.
Allow the Liquid Rubber RV Roof Coating to dry enough to
walk on, and repeat the process for the second side.
Make sure what you’re coating is at least 5 degrees above the dew point of the environment you are coating in. (See technical specs for more details)
For best results remove existing paints/coatings and apply directly to the substrate. (Some paints and coatings will not be compatible. Loose/flaky paint may be an indication that the existing paint/coating is not well bonded and therefore your Liquid Rubber solution may fail if applied over it instead of directly to the substrate. Oil based paints, enamels, epoxies, powder coats can be difficult to bond to. Contact your Liquid Rubber technical representative for further direction.)
If your RV is still under warranty be sure to contact the manufacturer to ensure you do not void the warranty.
It is always a good idea to apply a small test patch in an inconspicuous area to ensure adequate adhesion prior to full application.

Restore RV Roof

Restore Trailer Roof

Apply Seam Tape to Skylight

Application Guideline - RV Roofs

Liquid Rubber RV Roof Coating Data Sheet

Liquid Rubber RV Roof Coating Safety Data Sheet

Liquid Rubber RV Roof Coating

$84.95

We believe everyone should have a choice to buy high quality, environmentally friendly products. We believe you should have a choice to do your own projects (most of the time you can do it better yourself than hiring someone) and save money. We believe in Free Shipping (over $75) and Free Returns. We believe in making your experience the best it can possibly be. Please, please reach out to us with any questions. We want to make your project a success.

Fantastic product.

Does a super job as advertised, maybe better, I will be ordering more.

RV roof. 13 yrs old

I have a 27 foot toy hauler, the roof was 13 yrs old, And covered in black spots and had a small leak in the bathroom. It was time to due some maintenance. I purchased, cleaner, primer, sealer tape and 5 gallons of liquid rubber. The roof was cleaned and primed. All roof fixtures taped along with the front and back edges.
The first coat was difficult due to the tackiness of the primer, ended in bare feet, but had 4 clear days and applied 4 coats. 👍🤞🏻Now happy and hoping for another ten years.

Works perfectly

Fixed my leaking roof on my RV after the first coat! I recommend this to anyone who needs to stop a leak or help prevent one.

Primer issue

Primer was very sticky - had difficulty keeping debris off roof

Restaurer le toit de ma tente-roulotte

J’ai utilisé le primer tout usage et le Roof coating pour restaurer le toit d’une tente roulotte en fibre de verre aluminium qui avait 10 ans. Le primer semble avoir aidé à préparer la surface. Il faut aussi bien laver le toit. J’ai légèrement sablé la surface et j’avais fait les réparation avec le Seam tape.

J’ai eu beaucoup trop de produit avec le 5 gallons. J’ai mis 5-6 couches épaisses et il m’est resté plus de la moitié du 5 gallons. Prévoir un rouleau non pelucheux. Par contre il y avait de petits grumeaux dans le produit qui rendait l’application moins uniforme. Je devais les enlever au fur et à mesure que je roulais le produit, car c’est trop épais à filtrer. Sinon c’est un excellent produit que je recommande.

1 2 3

Protect Your Everlasting Family Memories

Any recreational vehicle gives you the chance to create memories that will last a lifetime. From traveling across the country to going camping for the weekend, your RV is the sanctuary that allows you to have a home away from home.

Yet RVs are notorious for leaks, and those leaks can quickly ruin a family vacation...and the lifelong mental souvenirs that were supposed to come with it. Liquid Rubber’s RV Roof Coating never lets another leak steal away those precious memories.

Keeping Your Family Safe, Cool, and Happy

The RV’s biggest strength is the potential for it to deliver you and your family on unforgettable journeys. Unfortunately, the RV also has a weakness. Vents, skylights, tears, and more leave the RV vulnerable to leaks and overheating that can turn your dream vacation into a nightmare.

With Liquid Rubber RV Roof Coating, those vulnerabilities disappear. It cures into a waterproof membrane, giving your vehicle the armor it needs to deliver you and your family safely to and from your destination.

And this solar reflective and UV resistant coating keeps your RV cool, meaning you’ll be comfortable throughout your entire journey.

Eliminates the Costly Repair Services Keeping You From Your Next Vacation

Delivering the highest quality possible is what drives Liquid Rubber because it serves as the gateway to our customers’ happiness.

When it comes to our RV Roof Coating, some of that happiness comes from helping you avoid those costly repairs that normally accompany any recreational vehicle.

This environmentally friendly coating keeps your RV from falling victim to the perils of leaks, and DIY application means virtually

Apply a minimum final thickness of 1 gallon per 50 sq ft (4.65 sq/m). It should require around 2-3 heavy coats to achieve your final membrane.
1 x 5 gallon pail of RV Roof Coating will coat RV's up to 30 feet. Be sure to use up all material.

Tips

Apply using a 3/8 (10mm) roller, brush or paint sprayer.
Apply to a clean, dry surface that is free of dirt, silicone, loose paint, rust, oil, grease, coal tar, or other contaminants.
Apply when temperature is above 10C/50F and rising.
Use Liquid Rubber RV Smart Cleaner to clean the surface.
Use Liquid Rubber EPDM Primer for EPDM roofs and Liquid Rubber Multi-Purpose for most others. (We do not have a primer for TPO roofs at this time.)
Apply each new coat in an alternate direction to the previous coat to ensure even thickness.
Apply next coat when dry to the touch (typically 6-8 hours, tacky is OK).
Typically cures in 48 hours.
Avoid hot, direct, intense sun when applying.
Avoid contact with solvents and solvent based cleaners, adhesives and paints.
Do not allow to freeze.
Do not combine black products with the colored products.
Do not apply in wet conditions (including fog and dew) or if rain is forecasted within 24 hours.
EPDM is a rubber sheet coating.
TPO and PVC are a plastic type sheet membrane. (we do not currently carry a primer for TPO)
Generally you can apply 1-2 coats per day
Apply material until you use up the required amount
Curing time depends on temperature, humidity and airflow
Remove painters tape as soon as possible (while coating is still wet).
If corrosion is present use a water-based rust primer.
Method: Work in manageable sections. Apply the Liquid
Rubber EPDM Primer to one side of the RV (leaving the other
side uncoated so that you can walk and work on it. ) Allow
the Liquid Rubber EPDM Primer to dry for 1-2 hours. Apply
the Liquid Rubber RV Roof Coating over the Liquid Rubber
EPDM Primer, leaving 4-6 inches of the primer exposed so that
you will be able to overlap it when you begin the second side.
Allow the Liquid Rubber RV Roof Coating to dry enough to
walk on, and repeat the process for the second side.
Make sure what you’re coating is at least 5 degrees above the dew point of the environment you are coating in. (See technical specs for more details)
For best results remove existing paints/coatings and apply directly to the substrate. (Some paints and coatings will not be compatible. Loose/flaky paint may be an indication that the existing paint/coating is not well bonded and therefore your Liquid Rubber solution may fail if applied over it instead of directly to the substrate. Oil based paints, enamels, epoxies, powder coats can be difficult to bond to. Contact your Liquid Rubber technical representative for further direction.)
If your RV is still under warranty be sure to contact the manufacturer to ensure you do not void the warranty.
It is always a good idea to apply a small test patch in an inconspicuous area to ensure adequate adhesion prior to full application.