RV Roof Coating Kit - 5 Gallon (18.9L)

Liquid Rubber RV Roof Coating is an environmentally friendly coating that keeps your RV free from leaks. The RV Roof Sealant cures into a waterproof membrane, giving your RV roof the armor it needs to deliver you and your family safely to and from your destination.

Liquid Rubber RV Roof Coating Kit comes with Seam Tape, RV Lap Sealant, EPDM & TPO Primer and RV Smart Cleaner to waterproof and protect up to a 30' RV Roof.

Kit Contents:

  • 1 - 5G pail of RV Roof Coating
  • 1 - Roll of 4" x 50' Seam Tape
  • 1 - 1G Pail of EPDM & TPO Primer
  • 1 - 1G Pail of RV Smart Cleaner
  • 4 x 10OZ (296ML) RV Lap Sealant Cartridges 
Regular price $524.95 Regular price
Color:
White
Due to computer monitors, colors may not be exactly as shown.
Size:
Also available to purchase on

RV Roof Coating Kit - 5 Gallon (18.9L)

Product Details

Liquid Rubber RV Roof Coating Kit comes with Seam Tape and EPDM Primer and RV Smart Cleaner to waterproof and protect up to a 30' RV Roof.

Kit Contents:

  • 1 - 5G pail of RV Roof Coating
  • 1 - Roll of 4" x 50' Seam Tape
  • 1 - 1G Pail of EPDM & TPO Primer
  • 1 - 1G Pail of RV Smart Cleaner
  • 4 x 10OZ (296ML) RV Lap Sealant Cartridges

Products that prove themselves

Durable
Safe
Easy to Use

Popular Uses

RV Roof Coating helps repair and restore RV Roofs as well as other types of roofs and surfaces. Here are some common uses for RV Roof Coating.

  • RV Roofs
  • Mobile Homes
  • Campers
  • Trailers
  • Metal Roofs
  • Sheds
  • Gutters
  • Walls
  • Ceilings
  • And More

Coverage

Liquid Rubber RV Roof Coating - Apply a minimum final thickness of 1 gallon per 50 sq ft (4.65 sq/m). It should require around 2-3 heavy coats to achieve your final membrane. (1 x 5 gallon pail of RV Roof Coating will coat RV's up to 30 feet. Be sure to use up all material.)

Liquid Rubber EPDM Primer - Apply a minimum final thickness of 1 gallon per 250 sq ft (23.23 sq/m).

Liquid Rubber RV Smart Cleaner - Approximately 200 sq.ft. (18 sq.m.) - 400 sq.ft. (37 sq.m.)per 1G (3.78L).

Liquid Rubber Seam Tape - 50 Linear feet of seam. Does not account for overlaps.

Liquid Rubber RV Lap Sealant - Approximately 22 linear feet (6.7m) at 5/16” (8mm) thickness per 10oz cartridge (Applying thicker will provide less linear feet. Typically 4 tubes for a 30 foot RV.)


Documents

For Step-By-Step Guides Specific to Your Project

1 Circle around step number design detail

Prepare Your Space and Gather Your Materials

Make sure your RV roof is completely dry and thoroughly clean, with any damages repaired. Use RV Smart Cleaner to clean the surface. TPO, fiberglass and aluminum should be scuffed to remove all shine. (TPO needs to be aggressively scuffed).

2 Circle around step number design detail

Detail Work

SEAM TAPE: Detail areas may include vents, skylights, etc. Precut Seam Tape to desired length and fit. Remove plastic backing before applying (be careful not to stretch the seam tape when removing the backing). Apply Seam Tape to all seams at perimeter and protrusions (vents, skylights, etc. Use pressure to activate adhesive leaving no wrinkles or fish-mouths. Overlap separate pieces of Seam Tape by at least 1 inch. Prime detail roof areas (not the Seam Tape) with the EPDM & TPO primer. When dry (tacky when cured), apply a heavy detail coat of RV Roof Coating over the Seam Tape to encapsulate (at least 1 inch beyond the edges of the Seam Tape). Allow to dry.

LAP SEALANT: As an alternative to Seam Tape, use Liquid Rubber RV Lap Sealant to bridge and seal gaps and seams. While Liquid Rubber Seam Tape provides a superior bond and performance, Liquid Rubber RV Lap Sealant will bridge and seal at an affordable price. 

Tip From the Pros: Tip From the Pros:

FOR BEST RESULTS REMOVE EXISTING PAINTS/COATINGS AND APPLY DIRECTLY TO THE SUBSTRATE.

3 Circle around step number design detail

Masking

Tape-off, block off or otherwise mask areas that are not to receive coating. Pull painters tape while coating is still wet.

4 Circle around step number design detail

Prime

Use EPDM & TPO primer for EPDM and TPO. Use Multi-Purpose Primer for most other roof types.

(For EPDM, fiberglass and TPO, wipe the surface with a white rag that has been dampened with acetone right before priming. For aluminum, if rusted, remove rust from areas before priming with 1-2 coats of Multi-Purpose Primer or a Rust Primer to prevent bleed through.)

Tip From the Pros: Tip From the Pros:

Apply each coat in an alternate direction to the last coat to ensure even coverage.

5 Circle around step number design detail

Apply Coating

Work in manageable sections. Apply the EPDM & TPO Primer to one side of the RV (leaving the other side uncoated so that you can walk and work on it ) Allow the EPDM & TPO Primer to dry for 1-2 hours (EPDM & TPO primer is very sticky, coat over as soon as possible to reduce debris sticking to it). Apply the RV Roof Coating using a brush, (3/8) 10mm roller or airless paint sprayer over the EPDM & TPO Primer, leaving 4-6 inches of the primer exposed. This will ensure you can overlap it when you begin the second side. Allow the RV Roof Coating to dry enough to walk on and repeat the process for the second side. Apply as many coats of RV Roof Coating until you use up required amount. Allow approximately 6-8 hours between coats or until dry to the touch with nothing wet underneath. Apply each new coat at a right angle to the previous coat to ensure even thickness.

6 Circle around step number design detail

Inspect and Protect

Inspect for pinholes, blisters, voids, thin spots or other defects. Repair as necessary.

7 Circle around step number design detail

Clean Up

Remove tape while coating is still wet and close container to secure leftover product. If spillage occurs, soak up as much material as possible with rags. Clean immediately with soap and water. If spill is dried, scrape off as much as possible with a razor or scraper. Use mineral spirits to weaken product and an appropriate tool such as a wire brush or grinder to mechanically remove. If splashed on the skin immediately wash thoroughly with fresh water. If the product has dried on the skin massage the area with medical grade mineral oil, baby oil or edible oil, then wash with soap and water. If irritation persists seek medical attention.

NEED SOME HELP? NEED SOME HELP?

OUR TEAM OF EXPERTS ARE STANDING BY TO HELP MAKE SURE YOUR PROJECT IS A SUCCESS. CALL OR EMAIL US AT 1-855-592-1049 SUPPORT@SHOPLIQUIDRUBBER.COM

8 Circle around step number design detail

If your RV is still under warranty be sure to contact the manufacturer to ensure you do not void the warranty.

Customer Reviews

Based on 6 reviews
67%
(4)
33%
(2)
0%
(0)
0%
(0)
0%
(0)
W
Wilson John
Great product!

Great product, all arrived on time. I wish I had ordered more tape. The kit includes one roll, I ordered a second but really should have trusted my gut and got 3. Now have to wait for the extra roll to arrive to finish the job.

G
Glen Locklear

RV Roof Coating Kit - 5 Gallon (18.9L)

J
Jim Kavy

Wish some instructions were included. Haven’t been able to try it let.

Hey Jim, Full Application Guidelines can be found at the bottom of each project page, I will instruct our technical team to email you a copy for your reference.

K
Kody Buechler

Ups destroyed the first product but liquid rubber quickly sent a replacement and I’m very happy with it

T
Tim Furlong
RV Kit

Prep work is a must and is necessary. Once prep is done the product went on very nice. It was a very good improvement to my roof. I wish I would of done this sooner. A very good preventive maintenance.