Had an issue with labelling on my pail. Talked to a representative. They were understanding and accommodating and resolved the issue. Deck looks good. I’m happy

The plywood decking on my Kayak Pool was a few.years old and starting to.show it's age. The cleaner did a great job of prepping the wood.

Have not used it yet will get back to you when I do

It's been a few weeks now since I put on our saddle brown liquid rubber coating onto a large 24' x 14' balcony. It handled the several rains and a few 28°C days no problem so far. The true test will be how it winters but I'm pleased so far.

I've used many different products to try and remove algea from my deck and nothing worked. Bought this product and wow am I ever happy with the outcome!

Purchased one gallon of primer and 2 gallons of Liquid Rubber "Color" to protect and cover 90 sq.ft.of deck. Very easy to apply,... Great product.

S'applique facilement et de très bonne qualité. imperméabilisation béton impeccable (3 couches avec Primer). il n'y a plus d'infiltration d'eau a travers le béton. Durci, mais reste assez flexible pour ne pas casser.
les taches sur les vêtements se nettoient facilement comme indiquer par le manufacturier, mais attention, une fois la tache sèche bonne chance pour la retirer.
je recommande fortement ce produit.

Pas fait encore.

Liquid Rubber Geo-Textile

I decided on Liquid Rubber after searching for a paint/roll on coating. My rear deck was rotting and the plywood underneath the vinyl membrane got so bad that my foot could go through! Trevor called back from LR as I had some questions before placing my order. He was a wealth of knowledge and I was comfortable taking on the job myself. The products arrived within a week I ordered the primer, Geo-Textile and a grey polyurethane final coat.

If you feel this is a scary process....don't worry. Their videos and YouTube resources will tell you everything you need and how to prepare the surfaces before applying the products. VERY straight forward.

I had to wait a week as the westcoast heat wave arrived, then the rains. I tarped the new plywood and started back up yesterday. Just got back in from a second coat of the rubber coating. It will take 4-5 coats as I still see my sheathing underneath but that's fine. I ordered the 5gallon pail and have enough to do 6 coats.

Only thing to be aware of is the tape still shows through. I'm not sure even with 6 coats the rubber coating will make the tape less noticeable. Overall, super simple to use and recommended. Excited to use the deck for the rest of the summer!

Materials are user friendly and effective

I used it to cover existing vent seals and end seal of roof. Between aluminum and rubber roof.
One roll did my 27 ft trailer

It survived last winter. Purchased another to fix a tear and cover some more RV roof seems. The paint survived too. Great stuff so far. 3 thumbs up. Will purchase again when needed. Especially the paint.

L'adhésif colle super bien. La bande de tissu empêche le produit d'être trop rigide et permet une pose plus aisée. Le seul hic, c'est qu'on doit le recouvrir d'enduit. On ne peut pas l'utiliser seul. Sinon c'est un excellent produit. Et combiné à l'enduit, c'est assurément la barrière la plus performante.

Hi,
I had 5 leaking corners grouped all together in a total segment of about 20 feet. Old thick grainy caulking was very tough to remove. Very hard and sticky. Best strategy to remove it was using a multi-tool (vibrating) with a small cutting blade. This was working greath but left a layer of residue. I used a glue remover called "The glue buster". It worked great and quickly. Then I used a wireless drill with a metal wire brush and wd-40 to disolve the leftover adhésive and reach bare métal (alluminum). I then applied a rich soapy solution and did the brush thing with drill using a new brush. I rinced everything to neutralize the glue cleener and the soapy residual. Then I applided an industrial grade cleaner to clean the whole gutter. A few days later, when weather forcast was good, I applied the seam tape. I used Windex on a towel to get rid of any greasy material on the locations to repair. Then, I used the seam tape. It was easier to apply than expected. I did not take any chance and I probably put more than required. With my pack of 2 x 15 feet = 30 feet, I only managed to do 3 corners instead of 5. I will have to order an extra pack. I put a single layer of the liquide rubber right now on 3 corners. I guess that quart that I am using Will be enough to complete the 5 corners with 2, maybe 3 layers. Put plastic gloves to apply then liquid rubber since it is not easy to remove it from fingers.
Repairing à corner is tricky and required more work than a straight section. Honestly, for all the work I had to do to prepare the 5 sections, maybe I should have paid someone to replace the problematic section but that would have cost a lot more and my time is free. I wish I would have find the multitool and glue buster and the drill wire brush before. The end result has a professional look and feel. Time will tell if it is a durable fix but I did everything by the book to get the best results. I will keep you poster.

The pond was stripped of a previous product that did not perform well.
Liquid rubber was applied and performed exceptionally well

The product went on easily with no problems it is a great product.

We just put the final coat on the pond and now we have to wait a week before we fill the pond up.

Liquid Rubber NeoPond Sealant

Over the years I've tried a half dozen products to seal several old concrete ponds with waterfalls - this is the first product that has worked and has now lasted for over one year. I'm now a second time purchaser as I intend to use it to complete the rest of the ponds. I wish I'd started with this product as it would have saved me a ton of work.